VE.Can To CAN-Bus BMS Type A Cable 5m

Victron VE.Can to CAN-bus BMS Type A Cable 5m - ASS030710050
 
Essential Communication: Upgrade your system's communication capabilities with the Victron VE.Can to CAN-bus BMS Type A Cable. Designed for seamless integration, this 5m RJ45 Ethernet-type cable ensures reliable connection between your Pylontech batteries and Victron inverters including Multiplus and Quattro.
 
Pin Perfect Compatibility: The cable's pin configuration is precisely matched to the chipset of the CAN port on lithium batteries, guaranteeing straightforward and secure connections.
 
Tested Compatibility: The BMS cable is thoroughly tested and proven to work with a range of batteries including Pylontech US2000, US2000C, US3000, US3000C, and US5000.
 
Installation Guide: Easily connect your systems: the side labeled 'CAN-bus BMS' connects directly to the battery, while the 'VE.Can' side links to either the VE.Can port of the GX device, or the BMS-Can port. Both port types on a GX Device can be configured for use with a CAN-bus BMS-connected third-party battery. Refer to your battery's brand-specific manual for configuration details.
 
Pin-out Details:
In cases where a custom setup is needed, below are the pin-out configurations. Ensure to test the cable meticulously post-crimping to avoid potential issues.
 
Function
Victron VE.Can Side
Battery Side
GND
Pin 3
Pin 6 (Type A); Pin 2 (Type B)
CAN-L
Pin 8
Pin 5
CAN-H
Pin 7
Pin 4